How To Print A Color File In Black And White On Hp Laserjet M880

Z7_3054ICK0KGTE30AQO5O3KA30N0

hp-concentra-wrapper-portlet

Actions

Fixing Print Quality Bug for the HP Color LaserJet Pro MFP M176n and M177fw Printer Series

Follow these solutions to set ink streaks, faded prints, and other mutual print quality problems.

Print from a different software program

Endeavor press from a dissimilar software program. If the page prints correctly, the problem is with the software program from which you lot were printing.

Set up the paper-type setting for the impress task

Bank check the paper-type setting if you lot are printing from a software program and the pages have any of these problems:

smeared print
fuzzy print
dark print
curled paper
scattered dots of toner
loose toner
small areas of missing toner

Check the newspaper-type setting (Windows)

From the software programme, select the Print option.
Select the product, and then click the Properties or Preferences button.
Click the Newspaper/Quality tab.
From the Media: drop-down list, select the correct paper type.
Click the OK button to close the Document Properties dialog box. In the Print dialog box, click the OK button to print the job.

Check the paper-type setting (Mac Bone X)

Click the File card, and then click the Print selection.
In the Printer menu, select the product.
By default, the print commuter displays the Copies & Pages carte. Open the menus drop-down listing, and then click the Finishing bill of fare.
Select a type from the Media-blazon drib-down list.
Click the Print button.

Check the toner-cartridge condition

Check the supplies condition page for the following information:

Estimated percentage of cartridge life remaining
Estimate pages remaining
Part numbers for HP toner cartridges
Number of pages printed

Use the following procedures to impress the supplies condition page:

LCD command console

On the product command panel, press the Setup button.
Open the post-obit menus:
- Reports
- Supplies condition
Select Print Supplies status page, then press the OK button.

Touchscreen control panel

From the Home screen on the product control panel, affect the Supplies push.
Touch the Report button to impress the supplies condition page.

Calibrate the product to align the colors

If the printed output has colored shadows, blurry graphics, or areas that accept poor color, y'all might need to calibrate the production to marshal the colors. Print the diagnostics folio from the Reports menu on the control panel to check the color alignment. If the blocks of colour on that page are non aligned with each other, you need to calibrate the product.

LCD control console

On the product command console, printing the Setup button.
Open the post-obit menus:
- System Setup
- Impress Quality
- Calibrate Color
Select the Calibrate At present option, and and then press the OK push button.

Touchscreen control panel

From the Dwelling screen on the product control console, bear upon the Setup button.
Open the following menus:
- System Setup
- Print Quality
- Color Calibration
Select the Calibrate now option, and then press the OK push.

Print a cleaning folio

LCD control panel

From the product command panel, press the Setup button.
Open the Service menu.
Select the Cleaning mode option, and then press the OK button.

The product prints the first side and and so prompts you to remove the folio from the output bin and reload it in Tray i, keeping the aforementioned orientation. Wait until the process is complete. Discard the page that prints.

Touchscreen control panel

From the Domicile screen on the production control panel, touch the Setup button.
Affect the Service menu.
Bear on the Cleaning Folio button.
Load plainly letter or A4 paper when you lot are prompted.
Affect the OK push button to begin the cleaning process.

The product prints the offset side then prompts you to remove the page from the output bin and reload it in Tray ane, keeping the aforementioned orientation. Wait until the process is complete. Discard the page that prints.

Perform boosted print quality troubleshooting

Impress the print quality page

LCD command panel

From the product control panel, press the Setup button.
Open the following menus:
- Arrangement Setup
- Reports
Select the Print Quality Study option, so press the OK button.

Touchscreen control panel

From the Home screen on the production control console, bear on the Setup button.
Open up the Reports menu.
Touch the Print Quality Page option, and then affect the OK button.

Interpret the print quality page

This page contains five bands of colour, which are divided into four groups every bit indicated in the post-obit illustration. By examining each group, y'all can isolate the problem to a detail toner cartridge.

Figure : Print-quality troubleshooting folio bands

Yellowish

Cyan

Black

Magenta

If dots or streaks appear in merely i of the groups, supercede the toner cartridge that correlates with that group.
If dots appear in more than 1 group, print a cleaning page. If this does not solve the problem, determine if the dots are always the aforementioned color; for instance, if magenta dots announced in all five color bands. If the dots are all the same color, replace that toner cartridge.
If streaks appear in multiple color bands, contact HP. A component other than the toner cartridge is probably causing the problem.

Inspect the toner cartridge for damage

Remove the toner cartridges from the product, and verify that the sealing tape has been removed.
Grasp both sides of the toner cartridge and distribute the toner by gently rocking the cartridge.
Check the memory chips for damage.
Examine the surface of the roller on the toner cartridges.

caution:
Practice not bear upon the roller on the toner cartridges. Fingerprints on the roller tin can crusade print-quality issues.
If you see any scratches, fingerprints, or other damage on the roller, replace the toner cartridge.
If the roller does not announced to be damaged, rock the toner cartridges gently several times and reinstall them. Print a few pages to see if the problem has resolved.

Check the paper and printing environment

Apply newspaper that meets HP specifications

Employ unlike newspaper if you are having whatsoever of the following issues:

The printing is too light or seems faded in areas.
Specks of toner are on the printed pages.
Toner is smearing on the printed pages.
Printed characters seem misformed.
Printed pages are curled.

Always employ a paper type and weight that this product supports. In addition, follow these guidelines when selecting newspaper:

Use paper that is of good quality and free of cuts, nicks, tears, spots, loose particles, dust, wrinkles, voids, staples, and curled or bent edges.
Use paper that has not been previously printed on.
Use paper that is designed for use in light amplification by stimulated emission of radiation printers. Practise non use newspaper that is designed just for use in inkjet printers.
Use paper that is not too rough. Using smoother paper generally results in better print quality.

Check the product environment

Verify that the production is operating inside the environmental specifications listed in the product Warranty and Legal Guide.

Bank check the EconoMode settings

HP does non recommend the full-time employ of EconoMode. If EconoMode is used full-fourth dimension, the toner supply might outlast the mechanical parts in the toner cartridge. If print quality begins to degrade and is no longer acceptable, consider replacing the toner cartridge.

Follow these steps if the entire page is as well nighttime or too light.

From the software programme, select the Print pick.
Select the product, and so click the Backdrop or Preferences button.
Click the Paper/Quality tab, then locate the Quality Settings expanse.
If the entire page is too nighttime, select the EconoMode setting.

If the entire page is too lite, make sure you are using the correct setting for the print job.
- If you a printing photos, select the Photo choice.
- For all other print jobs, select the Normal option.
Click the OK button to close the Document Backdrop dialog box. In the Print dialog box, click the OK button to print the job.

Adjust color settings (Windows)

Modify the colour theme

From the software programme, select the Impress option.
Select the product, and then click the Properties or Preferences button.
Click the Advanced button.
Select a color theme from the Color Themes drop-downwards list.
- None: No color theme is used.
- Default/sRGB: This theme sets the product to print RGB data in raw device mode. When using this theme, manage color in the software plan or in the operating arrangement for correct rendering.
- Bright/sRGB: The product increases the color saturation in the midtones. Use this theme when printing business graphics.
- Photo (sRGB): The product interprets RGB color every bit if it were printed as a photo using a digital mini lab. The product renders deeper, more than saturated colors differently than with the Default (sRBG) theme. Apply this theme when printing photos.
- Photo (Adobe RGB 1998): Utilise this theme with printing digital photos that use the AdobeRGB color space rather than sRGB. Turn off color management in the software program when using this theme.
Click the OK push button to shut the Avant-garde Options dialog box, and then click the OK button to close the Document Properties dialog box. In the Print dialog box, click the OK button to print the job.

Change the color options

From the software programme, select the Print selection.
Select the product, and so click the Properties or Preferences button.
Click the Newspaper/Quality tab.
In the Color department, select Black & White or Color.

annotation:
When Blackness & White is selected, the Print in Grayscale setting in the Avant-garde Options is automatically changed to the Blackness print cartridge only option.
Click the OK button to close the Document Backdrop dialog box. In the Print dialog box, click the OK push button to print the job.